R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 04-08-2012 | 05:25 PM
  #1978  
tony montana's Avatar
tony montana
Tech Champion
iTrader: (77)
 
Joined: Aug 2002
Posts: 6,500
From: Leonardtown Md.
Default

well got to race my buggy again yesterday and it didnt go so well. Car was very loose. I was basically a non contender. We had A threw D mains and I was in the middle of the C!!! Car would just spin out to easy. I had the correct tires on for the track as well. My current setup is close to stock minus blue front springs with 40wt. Yellow rears with 35wt, bottom inside hole on the front tower and inside on the hub, Rear, bottom inside hole on the tower, furthest outer hole on the hub. Opt 2 rack. If anyone has suggestions let me know. I went with the long rear camber link trying to slow the reaction down. Nitro car wasnt much better either but thats another story.
tony montana is offline