R/C Tech Forums - View Single Post - Servo not responding
Thread: Servo not responding
View Single Post
Old 04-08-2012 | 01:37 PM
  #2  
mooby64
Tech Master
iTrader: (3)
 
Joined: May 2010
Posts: 1,819
From: Chi-Town West Burbs
Default
Make sure you are plugged into the correct channel, on the receiver. Channel 1 for steering. Also check that the plug in not in backwards. The black wire to the outside of the receiver case. Good Luck
mooby64 is offline  
Reply