Originally Posted by
thefatkid
Just FYI, if you purchased the option rack from Associated (91181) and your running a kit truck you will need spacers or shorter ball studs. The kit uses an 8mm stud so without washers/spacers you will need a 6mm ball stud.
Originally Posted by
Vegatron75
Looks good man. Does the FT steering rack go lock to lock w/o hitting the servo saver arm?
With the ball stud torqued all the way to the rack, yes. Looking at the rack the thickenss where the ball stud mounts to the ft part is thinner then the kit part. It will be wednesday before I can get some shims. I'm not sure if this was an intended change for bump steer adjustment or needed for clearance.