Originally Posted by
JetMD
Has anyone with the gear stripping problem tried a thicker chassis yet? I had a MTX-4R with the same problem and tried every tip and trick to fix it with no luck. Even had a Mugen sponsored driver check my car and set my mesh and it immediately stripped and he was stumped. After I installed a thicker chassis, it never stripped again.
Gear mesh according to piestch grphs, the play on the 2 speed shaft and the bell shuld be 0.1.. And the 2 speed shoes apart as possible, and you won't strip gears. Don't adjust like these and even with a 5mm chasis and brace you'll strip gears
There's no issue, there's just misalignment from users all over the world