Originally Posted by
coconut
Does anyone run the smaller 32 pitch spur gear(smaller than the 62 tooth, I think its a 58 tooth)? If you do what pinion size are you using? If I was running say 12/62 and put the 58 spur in will a 14 pinion make the same equal performance as the 12/62?
Using a 5t8 spur with the 12t pinion is like going up a tooth (13t) on the 62t spur. Using a 11t pinion will be very close.
Just try the 12t pinion on the 58t spur but check temps. I use 14/58 or 15/62 w a tek pro4 4000kv