Originally Posted by
onekiwi
I got the link thanks and the cars set up just wondering what changes he said he has made since it was posted.
I also used 25 in the rear
Originally Posted by
murky123
I think he means these changes
Rear camber link changed to #3
Rear shock piston changed to drilled 4 hole x 1.2mm
Rear shock oil to Losi 22.5
Yes, these changes ^^^ plus, I changed the springs to Lt Green Durango fronts, and Lt Red Durango rears (you can use Losi Yellows from the 22 in the rear). In the front I went to 4 hole pistons as well with 30wt losi oil....in the rear I've been testing RC Shox two-stage pistons (6 hole 1.1/1.2 with 22.5wt right now) but the 4 hole set up on my current sheet is good to go. Mount lower front shock mounted outside hole on arm and one other thing is I'm down to a 1mm shim under the ball stud on the inner rear camber link and rear hubs mounted in the middle on the arm. Everything else the same.