R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 03-15-2012 | 06:35 AM
  #12775  
ray_munday's Avatar
ray_munday
Tech Elite
iTrader: (4)
 
Joined: Apr 2006
Posts: 2,823
From: Melbourne, Australia
Default
Originally Posted by InfamousJon
I'll be assembling my b4.1 later(I've been out of rc for 10 years) and wanted to know if I should use loctite on anything? And also if I should upgrade anything on the buggy right off the bat?
loctite: on the 4 screws which pass through the transmission into the motor plate, and on the 4 shock upper mounts (alloy). No need anywhere else as its all into plastic.

No need to upgrade anything from the WC kit... except for the rod ends. If you are starting out with wheels etc you may want to consider changing to the hex rims (personal preference only).

Ray
ray_munday is offline  
Reply