R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 03-12-2012 | 04:49 PM
  #12704  
t.mathewson's Avatar
t.mathewson
Tech Adept
iTrader: (13)
 
Joined: Dec 2011
Posts: 217
From: Lake Wales, FL
Default

Originally Posted by bds81175
Where are you pushing, corner entry or corner exit? I'm gonna guess exit. If so, you might try additional limiters in the front shocks. I know this will sound crazy but 25 or 20 degree caster blocks have more exit steering as well. Loosening the diff a bit helps too as long as you aren't barkin' the thing. You could try to decrease the rear roll stiffness or increase the front as well to more firmly plant the outside front tire on the track.
It's exiting. Is a really slow sweeping cornor similar to the bottom half of a small figure 8. I could try going back to 25 degree caster blocks. Hadn't thought of that. I might be able to decrease rear roll stiffness as well, but if i increase it in the front it makes the buggy feel really twitchy.. Thanks for the response!
t.mathewson is offline