R/C Tech Forums - View Single Post - Picco .12 Torque 2011 sluggish out of corners
Thread: Picco .12 Torque 2011 sluggish out of corners
View Single Post
Old 03-08-2012 | 09:27 PM
  #9  
stefan's Avatar
stefan
Tech Elite
 
Joined: Aug 2001
Posts: 3,278
From: Bavaria, Germany
Default
Originally Posted by Geezatec
If it takes awhile for idle speed to drop, it running too lean. What you lookin for, idle speed drops half a second to 1 second and go from there. Run a few laps and adjust as needed(LSN).
Sorry to disagree, but when it takes a long time to drop the idle speed, then it's usually to eich on the bottom.

If it's too rich on the bottom, you need to turn in the idle screw to keep it running and then, when you clear it out, the idle is too high and it takes a bit to load up again and drop the idle speed.
stefan is offline  
Reply