Old 03-08-2012, 04:41 PM
 
slow_jun
Tech Elite
iTrader: (14)
 
slow_jun's Avatar
 
Join Date: Aug 2009
Location: sa Earth
Posts: 2,732
Trader Rating: 14 (94%+)
Default

Both are almost the same, the only difference is Xerun 60A V2.0 has a lower BEC @5.75V/3A while the Extreme Stock is @ 6V/2A. i think the V2.0 is no longer available, better you get the later one or wait for the V3. it all depends on what application you will be using these ESC's. also bare in mind the Servo you will be using as the Voltage might affect or encounter some glitching issues on your setup.

Originally Posted by rccartips View Post
Hi,

Which is better?

1. Xerun 60A v2.0- Default Firmware is Mod ( no Turbo )
2. Xtreme Stock 60A - Default Firmware is super Stock( with Turbo )

Thanks in advance.
Ofcourse these firmware can be updated as per requirements. Gurus also chime in for additional advise.

As for me i have both xerun V2.0/2.1 120A for my Offroad 4Wd / 2Wd truck, so far no issues on glitching when using a Savox 1251MG.
slow_jun is offline  
Reply With Quote