R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 03-07-2012 | 08:06 PM
  #12490  
socalrcer's Avatar
socalrcer
Tech Adept
 
Joined: Dec 2010
Posts: 111
From: WCRC
Default

Originally Posted by tkd662
Hi

I'm new to off road and just got a b4.1, I ran it indoors for the 1st time tonight, the car is grate and ran well apart from 1 thing, when I was going over jumps the back end was trying to over take the front and the car was trying to flip. Any setup help any one could offer would be grate.
Other than the tips already mentioned, drag break setting and blipping the throttle, double check your pinion to spur free play. If you get hit hard in the back of a 2wd buggy it might push the motor up causing it to bind up, especially off power. Also might want to make sure with the pinion off or away from the spur that the tranny spins freely. If not make sure the screws holding the transmission together are just snug. They cause binding if over tightened.

Last edited by socalrcer; 03-07-2012 at 08:07 PM. Reason: spelling
socalrcer is offline