Originally Posted by
bjspinner
Just trying to update 223 went into the speedy ok put in my settings ok.
I have no chimes when I try to recalibrate.
Speedy plugged back into hotwire shows 223 and all my settings are there, however the 2 outside led's flash.
What is this from?
Mine is doing something similar, but isn't showing the 2 outside LEDs, just a solid center (it should be in blinky mode, it looks like a boosted mode indicator). The rightmost three dim lights move as they should from motor rotation, so I'd tend to believe the sensor cable isn't the problem. Steering also works correctly, so I'd be shocked if it was my radio.
After the update, if I push the mode button briefly it just goes dark. If I try to calibrate (push and hold the mode button), it blinks through the "starting calibration mode" sequence with the usual chimes, then goes dark and remains that way until I disconnect it from power for about 30-45 seconds, then when I plug it back in it'll do what I just described above again, but never actually calibrates. Reverting to 212 doesn't fix it, either. She was working fine just before I attempted the update.
My other cars that this version hasn't touched still work fine...
What am I doing wrong here?