Originally Posted by
Cain
Unfortunately that's not an option as the setup as it is is not where it needs to be. I can run it as it, but I will be down 2 laps or so against the losi as I can't take the turns as fast in the current configuration without traction rolling. So I need assistance on setup changes. I am looking at limiting shock travel as doing that on my 1/8 when we ran it indoors made all the difference between traction rolling versus being right up there with the fast guys.
As for the gearing, the track is maybe 30 x 30, its very very small. I am barely using any throttle to get around the track which is probably why the motor is heating up more than I like.
I just installed a Tekin 7.5 550 sc4x paired to a GTB last night. The indoor carpet track i race at is 60x40. I geared it at 62s-14p the motor never went over 100* with 20 minutes of run time on it and it ate up all the other lousys there. Also to help with my rolling over it has been lowered and 125000 oil in front diff and 30000 in rear diff. Not sure if it is right but drives smooth and works for me.