Originally Posted by
newb1
I have tried the following setting on software version VTC 111118.
Timing: 15-21deg
Turbo delay: 0
Turbo Timing: 52-56deg
Turbo Interval: 4-6
Punch: 8
PWM: 32K
Drag Brake: Personal Preference
Initial Brake: Personal Preference
FDR: 6.5-7.0
Motor Endbell Timing: +1-2 notches (Counter clockwise)
I believe this should work well on a big track. As for punchy feeling. I would try to have a different ratio. But running a higher ratio(Lower number) would require you to decrease the Timing and Turbo Timing. Increasing the Turbo Interval would also smooth out the throttle feel.
Hope the above helps.
Thanks for the setup! This is my settings that i found so smooth and nice
Timing: 3-6 deg
Turbo delay: 0.05
Turbo Timing: 48-56deg (depends on your style)
Turbo Interval: 7-8
Punch: 1-3 (i found out that it makes the tyre less spin, thus make the car easy to drive)
PWM: 64K
Drag Brake: Personal Preference
Initial Brake: Personal Preference
FDR: 5.8-6.0
Motor Endbell Timing: +1-2 notches (Counter clockwise)
Can someone test it and give your feedback? thanks