Originally Posted by
1tenner
OK so I took out the center diff and found a thin shim between the diff and the bearing on the motor mount. I'm thinking that there is a missing shim or two that are sitting on the factory assembly table next to the other bearing that was missing from my front diff. At least now I know what I need to order to get it working right....
thats the only spot that a shim will work, on the f/r diffs there really isn't a way to shim them like that, you will need to shim them with a 5x8mm shim on the pinion, the other shim on the center diff is to keep the spur off the motor mount,,, I know I tried that last summer with mine, still got a that extra shims I was gonna use in the front and rear diffs in my pit box, lol