need advise on setup of hw xerun 120a 1s esc
hello team crc i am new to electric rc and i am trying to setp the hw xerun 120a 1s esc on my xi i am running a 17.5 revtech motor with a revtech 6200mah 70c 1s lipo pack i have up dated the 2 in 1 program box but don't know what versions to use. i also hooked up the esc to the program box while it hooked to usb and still dont know what versions to program into the esc. please if i can get some help on this. most of the guys where i will be running use either tekin or lrp so not getting much advise. so it was suggested that i try to find out more from crc since the esc is used by crc so can i please get some help on set up
thanks in advance
oh by the way i am new to this so i need a goods setup to start out with and keep up with the seasoned guys until i have a better understanding of the esc.
thanks again for any help