Originally Posted by
bigtee
new to electric rc just brought a crc ix pan car and a hw 1s esc and a program box running a 17.5 revtech motor revtech 6200 mah 70c 1s lipo looking for a good setup for the speed control untill i get the hang of the programming of the esc. i need a good starting point with esc setup,gearing and roll out
Boost 50, Turbo 14. 100units/step, 1000Rpm Start. Fastest Turbo ramp, .1 Delay. 5% drag brake on tight tracks. Rollout 80-84mm.
If you are worried about temps, then turn the boost down to 35 or so, and approach in 5 unit increments.
Shawn