R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 02-14-2012 | 10:31 AM
  #11381  
jamr1130
Tech Master
iTrader: (120)
 
Joined: Apr 2011
Posts: 1,076
From: SoCal - Chillin in the LBC
Default
Originally Posted by EvanAZ
How much of an improvement is the alum. strc steering rack? and do I need bearings, if someone knows what size please post.

Thanks
Originally Posted by Kave
It is not as much a performance upgrade as a durability upgrade if you are already gluing your current servo saver. Some people have had issues breaking servo saver arms when hanging wheels up on tubes others have not. However if you are not currently gluing your servo saver you will likely notice increased steering response and more predictive handling.
Give the Avid bell crank a try. Smooth movement and steering response is right on. You can use your existing bearings too. But be warned you need a better metal geared servo to withstand the possible breakage from impacts. I run the Avid on both my B4.1 and SC10. It's the tits!
http://www.avidrc.com/product/5/acce...ccesories.html
jamr1130 is offline  
Reply