Originally Posted by
racing_jason
i would deffinately try gearing down that seems really high and maybe a slight less amount of turbo. also double check that you have your endbell timing at 0. those should help you with the brakes. i have ran this software now for a while and i have had very good success with the brakes. only other thing that it could be is a bad cap make sure the cap is good as well.
thanks Jason
I never run any endbell timing. i like the feel of gearing up a tooth then raising the endbell timing. and just from experience i find raising the timing to get the same amount as top speed with gearing creates more heat. Even with my gearing i've never blown up any motors while racing.