R/C Tech Forums - View Single Post - Tekin Rs v222 Problems.
Thread: Tekin Rs v222 Problems.
View Single Post
Old 02-13-2012 | 11:49 AM
  #27  
racing_jason's Avatar
racing_jason
Tech Addict
 
Joined: Dec 2006
Posts: 606
From: Washington
Default
Originally Posted by EskimoGangsta
yes sorry 2.0 internal.

so approx 5.3 FDR

voltage cutoff 2s
drive mode sensored only
motor direction Normal
throttle profile Custom
current limit Off
throttle min 5
push control Off
drag brake Off
brake strength 100
reverse speed 0
neutral width 10
brake min 5

boost 55
start 3216
end 23000

turbo delay 0.05

turbo 20
ramp 3

Esc temp avg 90 Deg F
motor temps Avg 130-140 Deg F
i would deffinately try gearing down that seems really high and maybe a slight less amount of turbo. also double check that you have your endbell timing at 0. those should help you with the brakes. i have ran this software now for a while and i have had very good success with the brakes. only other thing that it could be is a bad cap make sure the cap is good as well.
thanks Jason
racing_jason is offline  
Reply