R/C Tech Forums - View Single Post - Team Associated TC6 Thread

02-12-2012, 08:16 PM

#5736

olhipster1

Tech Elite

iTrader: (102)

Join Date: Dec 2004

Location: Far away from Covid19 but close to 20

Posts: 4,129

Trader Rating: 102 (100%+)

Quote:

Originally Posted by Big Features

I would start with a 4.0FDR and go from there. With 110ft straight, You'll most likely end up around 3.91 or so with a 96 Spur. I would use the "...." or "..." insert and tune for about 170 degrees or so. If the car feels flat, take some of the timing out and re-gear.

Mike

Quote:

Originally Posted by mtbboy

Hey Guys ,
Not the right thread for this but wth.

Starting fdr for
Tc6 Blinky.
Lrp x12 17.5
110 foot straight.

Thanks.
Dave.

agreed...start at 4.0 but start the motor with a 4 dot insert....
i've run this setup with a tekin or LRP Stock spec v2
works great....but remember fan is needed for blinky.

Reply