Originally Posted by
AreCee
My myLaps is in my 1/12 scale and difficult to get in and out of its holder so I opted to get a second one for my WGT.
I use the older AMBs in my 1/10 and 1/8. The workaround for a radio box is a short (3") aileron extension, plug that into the receiver and route the female end out of the box to plug in the transponder. I then affix the transponder with velcro on any of the vehicles.
Will I got one trans for now two holder, 3extension and two split extension for the two channel rx so one end plugs the battery and the other for the trans i think. and i got some velcro too not sure which way holds better but im gonna try them both till i get some more trans stomer got them for 98 something for the mylaps cheapest spot i found.