Originally Posted by
J-milz
Like it says. I like the spec aspect of racing the TCS series of racing. I wanna stay within the rules. So whats the top five racing hopups for the TT01? Here's my list:
1.Better servo faster/ more torque
2. Bearing kit
3. Race springs
4. Aluminum shaft
5. Ball diff's if you wanna spend the $$
I'm sure there are other list.... I'd like to get some feedback.
this is what i used in spec previously. the numbers are just for organization not necessarily for order of importance.
1.) bearings are important
2.) the oil filled dampers but use the mini short touring car springs
3.) the adjustable camber arm set
4.) get adjustable turnbuckles for the steering so u can set front toe
5.) aluminum shaft
6.) 55T speed tuned gear set w/ tamiya 27T pinion
7.) the rear toe-in uprights
8.) the lower arms from the tt01r, they have droop screws so u can do more tuning
9.) maybe the aluminum motor mount. just my preference cuz i prefer to have a stronger piece holding the motor.
i don't remember if there is a ball diff option. i used a heavier grease in the front and a slightly lighter one in the rear. tcs also doesn't allow the ball bearing steering hop-up so just make sure all the steering/servo linkages are not binding but doesn't have too much slop. other than these items make sure you clean your motor well and have a blast.
hope that helps.