Originally posted by jkerr0043
You should be able to splice a plug onto your fan and plug it into the batt plug on the receiver. Make sure the positive and neg wires are going into the right spots on the receiver. The third wire on the ESC and servo are signal wires. I wouldn't run the wires to the motor. That won't do any good.
OK, let me get this straight, when I splice a plug onto my fan<------ what kind of plug? and where do I get something like that? and what about that 3rd signal wire, is that something to worry about or do I need to splice something like that in too? This is all a bit remote to me, so guys please be patient
THANKS
- jAYbEe