MX-3 FHSS No Throttle?
I have a MX-3FHSS with a Airtronics 92324 receiver. Right now I have steering but no throttle. The servo is plugged into the top connector (ST) and the throttle is in the second connector (TH) of the receiver. Obviously this the way it is suppose to work. Here is the thing that I cant figure out, I can plug the ESC into the steering location and the steering into the throttle location and I can control the servo with trigger and the throttle with the wheel. At first I figured I killed the ESC so I bought a NEW Hobbywing EZRUN 60a and nothing has changed. I have tried many times to calibrate the ESC's throttle throttle range settings but I believe it is not picking up a signal from the receiver.
I have the radio set to these settings.
D/R ST 81%
EPA ST R 100%
EPA TH L 100%
EPA TH H 100%
AUX L 100%
ARC ST 0%
ARC TH 0%
SUB-T ST R 8
SUB-T TH 0
ST REV
TH REV
When you calibrate the throttle range setting on the ESC you are suppose to calibrate the neutral position first, if the setting takes a green light will blink once. Mine does nothing but beep nonstop.
Anyone have an opinion that isn't me buying new crap?
Thanks in advance