R/C Tech Forums - View Single Post - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
Old 01-25-2012, 11:19 PM
  #7547  
Miholc
Tech Apprentice
 
Miholc's Avatar
 
Join Date: Oct 2011
Location: Slovenija, Europe
Posts: 66
Default

Originally Posted by COBRARACING
you can run the x12's on any software from us as long as you dont go to aggressive on the esc settings and the adjustment of the x12 .

we have found that because the x12 has such a high degree of mechanical before you even add the dots that the esc will tend to go into sensorless mode .we have created new software the 930 mod and stock and the 508 and have adjusted the software for less sensor sensitivity but we cannot go lower as the sensor will eventually become useless .

conclusion dont go to crazy on the your settings and you will not have a problem running x12's
Thanks Angelo for your concern. I carefully read all of this and understand "problem" with X12 high mechanical timing.

However my problems were with the startup and loss of boost:
See post 7496.


Hope the 101224 will remedy this issues.
Miholc is offline