R/C Tech Forums - View Single Post - After-run procedures
View Single Post
Old 01-25-2012 | 07:02 PM
  #3  
bigjayjay1's Avatar
bigjayjay1
Tech Champion
iTrader: (87)
 
Joined: Jul 2009
Posts: 5,614
Default

You can buy after run at your hobby story or you can use wd40 don't use if you have a filled crank ie puddy in the crank. Make sure you blow air on your glow plug also clean your filter before take both items out. 5-7 drops of after run in both openings or a few sprays then place on bump box give it a few whirls. Put back plug and filter if filter dirty clean with dish soap add filter oil install. Go to YouTube
bigjayjay1 is offline