Originally Posted by
Cmjomaha
I just ordered up my dream setup today!!!
FMA Powerlab 6 Mean Well SE-1000-24 1000W 24V DC 41.6A Power Supply All the cables and a couple para boards
Now I'm trying to make sure I am calculating this right. If I am charging 4 4s 5000mah packs parallel it would be:
4s 20000mah 1c/20amp or 2c/40amp
4s pack 20amps x 16.8 = 336watts
This right? Just making sure I am thinking right and will have enough juice. Not sure on how long this charge would take?
Originally Posted by
Dave H
You math looks fine to me. Assuming the 1C case (20A/336W) its still up to around an hour give or take depending on how far they were discharged.
So.... I should be ok with a 2c charge:
4s pack 40amps x 16.8 = 672watts
and get the charge time down closer to 30 minutes...
Thanks again for your help.....