R/C Tech Forums - View Single Post - 6v Reciever pack question
View Single Post
Old 01-21-2012 | 05:43 PM
  #7  
imrob
Tech Master
iTrader: (7)
 
Joined: Jun 2011
Posts: 1,595
From: Illinois
Default

Originally Posted by AreCee
It's not the voltage but rather the amperage that's important. You're fine. Normally you don't charge those 2/3A packs with more than 1 amp and your charging voltage needs to be higher than your target's voltage for it to charge.
yes it the mah to watch out for is it just a fast charge or what cause 350 is fast charging that 1200 battery or can you adjust it you self cause a slow charge would be 120 mah for an overnight charge. which it what i would do for the pack most of the time unless at the track.
imrob is offline