Originally Posted by
CoyoteSlash
Where did the bearings go is what you're asking? I don't understand.
There are no 6x12x3 bearings in the kit. There's 5x10x3 Bearings? Those 'are' for the front and rear hubs. (traxxas makes them too, cheaper)
Edit: I checked my manual, the RTR manual (just to be sure) and also did several searches. There is no 6x12x3. I know you said that they are definitely different, but they don't belong on that truck.
Amain doesn't carry
Tower doesn't carry
Horizon doesn't carry
You're in the Twilight Zone of bearings! (or remeasure them. :P )
totally know what you're saying....I couldn't find anything on them either....thought I was loosing my mind. I put one of these bearings on top of the bearings that go into the gearbox that holds the topshafts....my manual says that those are supposed to be 6x12x4...these are absolutely identical inner diameter, outer diameter, and just slightly thinner....and my manual says that both front hub bearings (inner and outer) are 6x12x4....but these fit!! my calipers show 3.46mm...the double rubber sealed ones measure 3.98mm....gah!!!! head games.....it's all a conspiracy to leave me here scratching my head for hours when nothing is wrong! (still not sure why only one side is rubber sealed..and yes, they came off my truck..I only have one vehicle apart at a time and every part goes into a Plano box....so far, no extra parts...I only have 4 bearings left, which belong in the rear hub carriers, which will be assembled later....)
Ok, enough ranting about nothing being wrong...back to polishing hinge pins and re-assembling my truck!