Yes you can use the Hobbywing advanced LCD programming link just as you normally would on a hobbywing branded esc.or the usb "dongle"..I actually used the yellow dongle to flash my blue hobbywing..worked just fine..I also wanted to point out that when you link to the speedo using the dongle it auto detects the hardware and the firmware installed .It registered as a hobbywing XeRun as the hardware and it had hobbywing firmware already on it..I then installed Hobbywing 508 zero timing firmware for Blinky legal use..This IS a hobbywing Xerun speedo..Its not a clone.It performs exactly like my Blue Hobbywing branded esc.