Originally Posted by
TRAV15%#?!
Had a hectic weekend of racing.... had a buddy pitting for me that got a little "screwdriver happy"... Needless to say its all over the place now... I followed the break in procedure, but what's a quick go-to setting to get me back in the ballpark? ... And where can I get some WERKS decals for my new ride?
Hi, any time that you get out of whack and want to get in the ballpark quickly just set the engine to flush on both the HS and LS, set the air gap to 0.5mm and fire it up. Warm up the engine and adjust idle using the LS (leaner=faster, richer=slower). Once you have this set put the car on the track and adjust the top end on the straight using the HS needle (so you are going to have to lean the HS.). Leaning the HS affects overall fuel delivery so it will bring up the idle, just richen the LS 1-2 hours, blip throttle, let come to idle and re-adjust if needed. Continue tuning the HS (and compensating for idle changes) until you have the top set where you like it. Do a final adjustment to the idle speed using the LS and your engine is tuned! Should take you less than 10 minutes to do!
