R/C Tech Forums - View Single Post - Kyosho VoneR Thread
View Single Post
Old 04-15-2002, 09:21 PM
  #2156  
AMGRacer
Tech Elite
 
AMGRacer's Avatar
 
Join Date: Oct 2001
Location: Brisbane, Australia
Posts: 3,939
Default

Originally posted by THeGame
AMGRacer-

i Just got the swarBAR kit from Kyosho"not the blade kit" for the front of the VoneR.. The only problem is i cant find anything to mount it to my uperdeck.. What are you using for swaybar mounts ? Where do the mounts come from....

thanks.

-Tg
Did you get the manual with your car?

Check this link. http://www.angelfire.com/realm2/amgr...oner_man_6.jpg

There is a part tree with the roll over bar on it and the radio tray supports. Look at the only greyed out items they are the plastic bits you need. Then you need to fix this part to the front of the top plate with two long cap head screws in place of the original capheads (front two which hold the deck in) and two flanged screws go into the other holes to hold the bar in.

Kinda tough to explain hope this helps.

The swaybars come with instructions which should show this in more detail. If you are missing your car manual try here: http://www2.towerhobbies.com/cgi-bin...1&I=LXXG63&P=7
AMGRacer is offline