R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 01-05-2012 | 10:16 AM
  #14079  
MantisWorx's Avatar
MantisWorx
Tech Champion
iTrader: (28)
 
Joined: Jun 2010
Posts: 5,955
Default

Originally Posted by Mizchief
My basic setup:
Front: yellow springs & sway 32wt shocks, 30k diff
Rear: blue springs & sway, 30wt shocks, 5k diff
Proline caliber sc 2.0 super soft tires on protrack wheels
Pin mod with garo's and basket

15/62 gearing on the pro 4 gives me enough low end power to make every jump from a stand still at the base.

I use the same basic setup outdoors as well with PL snipers

after the pin mod I have a little to much push and need to lower the front diff fluid (center diff is on the way, going down to 20k after that)

Once the calbers wear down a bit they provide just the right amout of traction for me to get pleny of forward bite, but sill slide around enough in turns to prevent traction rolls.
its going to push like a snowplow with the center dif and 20k!! i have 10k now and am going down to 7 on my next build.
MantisWorx is offline