A strange problem with my TC6.1!? When I build my car and set it on my Hudy I realized that the rear Toe is not symmetric. The difference is 1.5 degree! Shimming left/right is symmetric, bulkheads not bent, minimal slope in the parts, camber links same length, camber 2 degree both sides, arm mounts 3A all around ... To achieve symmetric toe values I shimmed
Left side (FWD 1.5mm) (offset RWD 0.5mm)
Right side (FWD 0.5mm) (offset RWD 1.5mm)
Regards, G