Originally Posted by
djiewie
i`ve bent the xray arm a little, used a heat gun.
hope this helps you.
Originally Posted by
piper48
I wish I could tell you why my Savox SC-1258 fits. I've got an older NT1 which I believe is the first production model. I bought it used and the previous owner ran a Futaba BLS series servo so the car came with 25t Futaba servo arm but I'm not sure if it's an XRAY brand.
I rebuilt the car per manual using spacers for a Futaba servo and used the Savox metal grommets, cap screw, and held it together with HPI 3mm lock nuts. As for the servo arm, you could try an Associated arm to see if it works. Hope that helps.
Thanks for the ideas.
I did notice something, the car I got is the 2010 WC edition and a friend of mine has an earlier version, maybe the first or second year they were out. The radio tray on the WC edition is narrower and the steering servo is closer to the center, which would explain why I don't have any shims and don't have much clearance.