R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 12-30-2011 | 02:23 AM
  #9026  
idrummerboy13's Avatar
idrummerboy13
Tech Elite
iTrader: (15)
 
Joined: Jul 2010
Posts: 2,021
From: Deer Park
Default

Originally Posted by Wild Cherry
I like the V2 for the extra corner speed it has compared to the standard V1 bar code tire .

We run both at Trcr with great results , but most are using the v2 .

Personally I feel its not the tread pattern but rather the compound on the v2 gold is softer than the v1 gold .

i know , maybe I'm wrong .

but , I can feel & smell the difference between the two....
the track is about 70degrees heat is always on when its cold outside, coldest it gets is 60degrees but not for long.

BITE is very nice med to high, always swept and clean during racing. Bk bars in pink are burned, gripped, wd40, gripped after every run to keep them soft but they wear out fast! but this is what all are doing. Bald seem to work well untill it gets colder in the place. Will try gold v2s on 2wd i have v1s. Green v2s may work if I work them a little bit. Will try during different conditions.
idrummerboy13 is offline