Originally Posted by
ioxqq
Just got 6.1, want to understand the rear toe combination related to rear hub insert, sus mount shim thickness. Is there a chart showing what I need? thx
ioxqq,
I would recommend starting out with the zero degree hub inserts for most conditions.
Every 0.85 mm of shimming different between the front and rear produces 1 degree of toe in.
Generally, I like running 3 degrees of toe in on the rear, and to produce this I would recommend starting out with either 0.5 mm shim in the front and 3.0 mm in the rear or 1.0 mm in the front and 3.5 mm in the rear ...both of these will yeild approximately 3 degrees of rear toe in.
Hope this helps!