Originally Posted by
Fabricio
Shawn, below is the speedo setup, I upgraded it to the 930, didn't changed anything on it.
Here it goes:
1 Running mode: For/Brake
2 Drag brake: 0%
3 Voltage prot: 3.0V/Cell
4 DRRS Punch: Level 9
5 Brake force: 50%
6 Reverse force: 25%
7 Initial brake: 0%
8 Neutral range: 6%
9 Boost timing: 36
10 Turbo slope: 18
11 Overheat prot: Enable
12 Turbo timing: 24
13 Start RPM: 4000
14 Turbo delay: 0,3 sec
15 Timing ACC 350
I am assuming you are running an FDR around 7.0-7.5 ? I would bring your Boost in at a higher RPM, 8000-10,000, and bring it in ait quicker 300rpm/step. You can bump the boost up alittle more, to 40.
Other than that. I cant see a problem there. Could be gearing, you mentioned you have a hobbywing motor? Maybe someone can chime in, but I have never run one before, but I have heard they like to Rev. So, maybe FDR towards the 8 range.
Shawn.