Originally Posted by
Chris Gierse
Could somebody tell me if the Rulux 3332 SC10 4x4 wheels have the same offset as the Rulux 3346B SCT-E wheels? The reason why I ask is that I used my AE (not JC) SC10 4x4 wheels on my Ten SCTE (after trimming some webbing on the front wheels) and they seemed to have a much greater offset than the stock Losi Ten SCT-E wheels. I was thinking both trucks used zero offset wheels. Maybe I am wrong on that.
Unfortunately there is a misconception regarding zero offset wheels. It's all relative depending on the vehicle. Realistically a zero offset wheel would have the hex in the center of the wheel, but consumers have adapted the zero offset title for wheels that have the hex close to the outer face of the wheel.
Our JConcepts wheels have a 1mm difference between the 3332B (SC10) and 3346B (Losi).