Originally Posted by
haywood
Which ones do you recommend removing?
I drive without the 2 screws in the motormount, but I have seen guys with 2 screws in the mountmount and 2 screws in the most rear holes of the bulkhead. I haven't tried adding or removing more screws. I'll try that next time.
Originally Posted by
bucketboy
Cut the top deck, reshape the chassis like the 12 and move the servo east west, transformed the car when I did it, much wider set up window, back end is now glued to the track.
Bb
Did you use a 2012 chassis to mark the bigger cuts in the chassis and then just dremel the chassis?