R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 12-18-2011 | 02:31 PM
  #1062  
porkchop's Avatar
porkchop
Tech Elite
 
Joined: May 2004
Posts: 2,830
From: o-h-i-o
Default

thanks jared

we ran on a tight indoor clay track with a few 180s the car just felt good.

set up
diffs
5/5/3
shocks

front
8 hole 1.4 pistons
blue springs
45 wt losi oil
location
3/b

rear
10 hole 5/55 5/56
yellow spring
35wt losi oil
5/b

front insert
0/0

10 deg castor blocks

number 3 rack

sway bars
front 2.5 one mm of slop in the ball at the bottom

i think a 2.3 would been better at the end of the stright but it made the car feel like dumped over to hard ever where eles so we left alone

2.3 rear bar

smooth the car out i thought

rear inserts
6 toe side
5 up squate side

rear link 2/b with the c link i felt my car was to looked into the track for me

front link
2/b

camber
1.5 all around

ride height
27mm all around

wheel base
take all 3 shims out take the two small ones put them on the back side the hub big one front of it.


i hope you guys can try this and it help you with your cars

Last edited by porkchop; 12-18-2011 at 07:41 PM.
porkchop is offline