Originally Posted by
dirtman71
Well my novak gtb just broke. So now I need a replacement. Just picked up a 12r5.1 with lipo, saxox servo. all I need is motor and esc. the guy I got it from had a LRP 5.5 and it was wicked fast, to fast for him. No time on the car but one pack....anyways I was looking at the hobbywing clone on ebay
http://www.ebay.com/itm/Sensored-Bru...item256a7dcd7f
2wdmod...were you running the same esc just 35a with the 2200 or 17.5t or whatever the motor was
This is a tiny 1/12 scale and I was hoping to get away with a 35a esc with a 17.5
I just ordered that same speedo you have a link to..the 35 A sensorless isnt 1s capable so you will need to run it in non lipo cut-off mode if you want to go that route, but really for racing the one you have linked is the way to go.It runs sensored or sensorless motors so your good to go whether you need to run a ROAR legal 17.5/"blinky" set-up or you want to run some cheapo higher KV sensorless motors for bashing with...But just to answer your original question here are the el cheapo systems i currently have and what they are in.
Hobbywing 60A sensored esc running an orion 17.5 in my 2wd buggy
Hobbywing 35a sensorless running a tacon 2230 kv in a losi SCT
and the one you have linked will be going in a 1/8 SC late model project.