R/C Tech Forums - View Single Post - Serpent 710
Thread: Serpent 710
View Single Post
Old 07-25-2004, 02:48 PM
  #14392  
rcpanama
Tech Adept
 
rcpanama's Avatar
 
Join Date: Mar 2004
Location: Panama
Posts: 181
Smile

Hi I will like to get some advice in reference to my Set Up. I has been raising in a large Parking loot Track with the 710, the set up I have works very good in that Track (med low traction) , I will show the set up.

We will start as of Sunday running in an other Track which is smaller (High Traction), one Fast Sweeper coming in the straight one slow one coming out, four hair pings and one chicane.

This track is very small compare to the other, we change track during our 14 raising in the year, depending on the sponsor.

The Set Up I have is the following:

Engine Nova Rossi NSR12 S3, with two ceramic Boca Bearing, Nova Mega crankshaft 11.5 Outlaw MS for Novarossi, yellow shoes, with 1.8 spring.
Fuel 20% Nitro 12% oil with Nitro Blast Additive.
Glowplug C6TF Novarossi
Pipe Nova Mega 5P out low

Tires Ellegi 40 front & rear


Shocks Red front & rear, 35 / 3 holes front, 40 / 3 holes rear
Shock Mounting front 2 & rear 1 (Default)

Transmition Spur 61 / 57 Pinion 16 / 21

Drive Train Rear Ball Diff Med hard / Front One way

Roll Center Rear UTI / LT Front 0mm under

Down Stop Front 0mm Rear 7mm

Camber Front 1.5 Left & Right Rear 3.0 Left & Right

Toe Front 1 out rear 2 in

Caster 2mm front

Ride Height Front 6mm Rear 7mm

Body Alpha Prot.

Car Weight without Body & Fuel (includes transponder & temperature gauge) 1665g
With Body 1785g


Bearing Complete Boca Bearings set and Ceramic bearing in rear Ball Diff.

The car has the three latest Aluminum option from Serpent, Hudy Dog Bones front & Rear, Hudy Drive shafts front & Rear, Ventilated Disk Brake, Hudy drive shaft in One-way.

What will be a good change from this Set Up to move to a smaller track (more technical & higher traction?

Thanks
rcpanama is offline