Ok... thanks.

How's this for a setup procedure:

1) Get car balanced left to right on balance pins
2) Check front axle height w/ calipers(Mark Payne style)
3) Set pod droop
4) Set ride height with a fresh set of equal/trued tires
5) Set front camber/toe
6) Recheck ride height
7) Check front droop w/ quarter/coin-drop method
8) Check rear tweak by picking the car up from the center of the rear pod
9) Put car on tweak board to double check accuracy of #7 and 8 above


Sound good? Any thing out of order?