Originally Posted by
JamesL_71
Thanks for the info.
At this point, one of the confusing things is also that everyone seems to have their own way setting up and tweaking 12th scale cars. With sedans, things are pretty simple and straight forward.
I have one more question.... When you guys put your car on the tweak board, do you put the front or rear on the balance/floating beam side?
Front however best way to tweak 12th is to set ride height then on flat surface from the back lift up the low part and center of the pod and look for which wheel lifts up first then adjust tweak screws
It's fast, simple and free
