Here are a few pics of my Vorza with a Pro-line Bulldog body for D8 mounted and finished. Also a couple of pics of how i got the body to fit better than factory body. Basically just turn your ESC clockwise 90 degrees and tighten screws. The ESC has 4 mounting holes on the bottom so it can be mounted facing any direction. Then you have to loosen your motor clamps and turn your motor. NOTE: To get the best fit rotated the motor towards the ESC as shown in pics. If you rotate it out the body will still rub. Also you will have to shave a little off the body around were the steering linkage is. You will see when you turn all the way in either direction.