[QUOTE=Solara;10027257]10* is a good starting point on boost setup with the motor...but I know we usually run at 15* (red ring came with the MMM motor) and it is working too. But it is very very close to the melting point...just keep checking temp and motor performance...
i sure will the motor is great has a heap more punch than the V3, the temps here are getting hot and humid so i want to get a good base set up for hotter days and when it starts cooling off start to gear a little different. so far i have been logging temps day temp track temp gearing and run time temps so i hopefully i will have a good starting point depending on the weather. if i am running max boost and max turbo i would like to start the motor on around 5 degrees timing and see how it goes as well. running full timing here would be good in Blinky mode and would be so much more easier just having to gear the motor and that would be it.