Originally Posted by
Ultra7M
I have been using standard Kyosho springs and just started using Losi Big Bore springs and then maybe eventually try the Kyosho big bore springs. As for Cavs setup he is using White Kyosho springs which have are advertised as 3.72 but really measures 3.22. The Gold Kyoshos are advertised as 2.5 but measure at 2.14. (This chart is helpful:
http://www.petitrc.com/reglages/BuggyBigBoreSpring.pdf ). The fronts may seem really stiff but that means that he is most likely running inside on both the tower and the arm. Going in on the arm requires a stiffer spring and fwiw more limiters.
I use to run standard Kyosho orange up front and dark yellow in the rears. I switched to Losi BB Orange up front and Losi BB Yellow in the rear. The rears are dialed. The front's feel a little too stiff especially for the slightly bumpy tracks I race on. Also the front springs may be a tad too long. My adjustment collar is all the way to the top and I am right at 24mm. I hope this info helps.
I like that chart myself, but totally missed the actual rates. I can confirm he wasn't inside/inside (as I saw them up close at the race). But the track we ran on was high grip and required a stiffer spring, so it makes sense.
I think I will stick with the Losi BB springs as they appear to match their advertised spring rate and are a ton cheaper (unless someone can confirm the kyo springs are more dialed).
Thx!