R/C Tech Forums - View Single Post - 3 racing new F1
Thread: 3 racing new F1
View Single Post
Old 12-10-2011, 07:19 PM
  #1024  
liljohn1064
Tech Champion
iTrader: (17)
 
liljohn1064's Avatar
 
Join Date: Sep 2008
Location: Deerfield, WI
Posts: 5,919
Trader Rating: 17 (100%+)
Default

More testing, better results. I'm still running my piano wire front arms and 28 grams of weight on the lower deck up against the battery stop. The car stayed flat in the corners, but still extremely pushy. I was busy trying to get my WGT car ready so only got in 2 runs. I need to spend a day or two just with this car.

As run:
Ride medium slick fronts.
Stock spring.
No spacers under the rear ball.
Approximately 1/2mm droop.
-2* camber.
Caster at 3 notches.
Ride height 3.5mm

Ride medium slick rears.
Stock spring.
Single hole pistion with stock oil.
0* Camber.
2mm droop.
Ride height 3.5mm

Next step, add spacers to the rear pivot and try to get some additional caster gain. Start with a different initial caster position.
liljohn1064 is offline